Author Topic: Stealthforce Bi-Directional Wrench with Trigger Control  (Read 1574 times)

0 Members and 1 Guest are viewing this topic.

Offline rusty

  • Grumpiest Hippie
  • Administrator
  • Hero Member
  • *****
  • Posts: 6860
  • Reputation: 1743
Stealthforce Bi-Directional Wrench with Trigger Control
« on: October 12, 2011, 06:26:12 PM »
I dunno about this idea.



AGS Company introduces the Stealthforce Bi-Directional Wrench with Trigger Control. Instead of relying on the ‘tooth and pawl’ design, the Stealthforce uses a cam and clutch-groove design, to reduce backlash while allowing a perfectly smooth and silent ratcheting action. The dual pivot-point allows instant direction reversal, with or without actuation of the trigger mechanism. The hex shaped head also offers maximum contact on worn nuts and bolts. The final result is a multidirectional, smooth-action, thin profile, zero-slip tool. The Stealthforce comes in a full range of SAE (3/8” to 15/16”) and metric (10mm to 19mm) sizes. Sets and individual wrenches available.
Tool do job=Good tool

A 'Veteran'is someone who, at one point in his life, wrote a blank check made
payable to 'The United States of America,' for an amount of 'up to, and
including his life.'

Tools and Garages

Stealthforce Bi-Directional Wrench with Trigger Control
« on: October 12, 2011, 06:26:12 PM »

Offline Fins/413

  • A Tool whore
  • Hero Member
  • *****
  • Posts: 1784
  • Reputation: 6
  • The man with the 57 models
Re: Stealthforce Bi-Directional Wrench with Trigger Control
« Reply #1 on: October 13, 2011, 06:52:52 AM »
That sure is different.
Eric Corse
Wake Forest, NC
1959 Chrysler New Yorker
1982 Ford Econoline

Offline goodfellow

  • Hero Member
  • *****
  • Posts: 2063
  • Reputation: 364
Re: Stealthforce Bi-Directional Wrench with Trigger Control
« Reply #2 on: October 13, 2011, 07:27:01 AM »
Too cumbersome and ungainly in the ass end. No thanks --- a quality fine tooth ratcheting wrench will do the job just fine; AND probably at 1/3 of the cost.

Offline sk farmer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 560
  • Reputation: 119
Re: Stealthforce Bi-Directional Wrench with Trigger Control
« Reply #3 on: October 13, 2011, 09:00:27 AM »
cheesy, maybe if they send me a set to demo.
you can put candles on a cowpie, but that won't make it a birthday cake.

Offline rusty

  • Grumpiest Hippie
  • Administrator
  • Hero Member
  • *****
  • Posts: 6860
  • Reputation: 1743
Re: Stealthforce Bi-Directional Wrench with Trigger Control
« Reply #4 on: October 13, 2011, 09:42:27 AM »
I agree Ray. I opened the email and had a, "What where they smoking?", moment.

But I decided to post it as a semi serious product.  :lol2: :lol2:
Tool do job=Good tool

A 'Veteran'is someone who, at one point in his life, wrote a blank check made
payable to 'The United States of America,' for an amount of 'up to, and
including his life.'

Offline rusty

  • Grumpiest Hippie
  • Administrator
  • Hero Member
  • *****
  • Posts: 6860
  • Reputation: 1743
Re: Stealthforce Bi-Directional Wrench with Trigger Control
« Reply #5 on: October 13, 2011, 09:56:06 AM »
http://xforcetools.com/products/stealthforce

Watch the video in the bottom right corner.
Tool do job=Good tool

A 'Veteran'is someone who, at one point in his life, wrote a blank check made
payable to 'The United States of America,' for an amount of 'up to, and
including his life.'

Offline Fins/413

  • A Tool whore
  • Hero Member
  • *****
  • Posts: 1784
  • Reputation: 6
  • The man with the 57 models
Re: Stealthforce Bi-Directional Wrench with Trigger Control
« Reply #6 on: October 13, 2011, 01:48:46 PM »
Well after watching the video I've decided to sell all my tools and buy two sets of these.  :lol: :lol2:
Eric Corse
Wake Forest, NC
1959 Chrysler New Yorker
1982 Ford Econoline